SWIX

HydroCarbon (CHX) Glide Wax 180g Blocks

  • Sale
  • Regular price $35.95


CHX Waxes - Hydrocarbon

CHX stands for Hydrocarbon.  This category has no flourocarbon material in the blends. They are 100% high performance hydrocarbon paraffins. Although they can be looked upon as an economical racing wax group, the colder waxes perform very well alone, and the warmer waxes make an acceptable base layer for Cera F.

CH4X Green, -12C/-32C, 180g

Temperature range from -12C to -32C (10F to -25F). Recommended iron temp: 155C (311F).A new cold hydrocarbon wax for extreme cold conditions, which can perfectly be used alone as a race wax when the air humidity is low. It performs very well on artificial snow and has a great durability. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability.Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. Scraping after appr, one minute.In the warmer part of the temperature range, and when high air humidity, Cera F powder, such as FC04X will increase the performance.

CH5X Turquoise, -8 C/-14C, 180g

Temperature range from -8C to -14C (18F to 7F). Recommended iron temp: 150C (311F).The 5 series is brand new for the Cera Nova X line, and fulfill a hardness gap between the 4 and the 6 series. It's easier to apply than the 4 series, but provides outstanding glide properties within its temperature range, and has a great durability.The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability.Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. Scraping after appr, one minute.CH05X can be used as a race wax alone, but is often used as a base for Cera F powder, such as FC05X.

CH6X Blue, -5 C/-10C, 180g

Temperature range from -5C to -10C (23F to 14F). Recommended iron temp: 145C (293F). Our std. CH6 has been a success in the Cera Nova system, and through comprehensive testing we have not found anything better. It is an economic training and racing wax as well as a base prep wax for cold skis. CH06X has high durability and offer great performance in most snow conditions as well as on artificial and glacier snow.The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.

CH7X Violet, -2C/-8C, 180g

Temperature range from -2C to -8C (28F to 18F). Recommended iron temp: 140C (284F). A new and improved wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result.It is an economic training and racing wax as well as an all round base prep wax.The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.

CH8X Red, -4C/4C, 180g

Temperature range from -4C to 4C (25F to 39F). Recommended iron temp: 130C (266F). A continuation of the std. CH8. An economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with.The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.

CH10X Yellow, 0C/10C, 180g

Temperature range from 0C to 10�C (32F to 50F). Recommended iron temp: 120C (248F). A new wax for the Cera Nova X line made a slightly harder than the old CH10Test results show that a harder wax performs better in very wet saturated snow. The adjusted hardness makes it more durable than before. Good wax for base prep and training. For racing we recommend to go with fluoro wax in this temperature area.The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.



Related Products